![]() ![]() Align connections by carefully rotating the ring clamp and installing the lamp plug.Insert and secure the lamp/sleeve assembly.Install new lamp and secure into sleeve being careful not to over tighten which can break the sleeve.Insert new o-rings and tighten the sleeve bolt to the quartz sleeve.More details on how to clean a quartz sleeve here. To clean, use a cloth soaked in CLR, vinegar or some other mild acid. Unscrew the sleeve bolt and remove o-rings from the quartz sleeve.Unscrew the UV lamp by holding the sleeve bolt.Remove the lamp/sleeve assembly along with the sleeve bolt from the chamber.By putting on latex gloves before removing the lamp or sleeve, you can protect the lamp and sleeve from oils on skin that can cause damage. Remove the lamp plug, but make sure the strain relief wires remain connected. ![]() Carefully remove safety cap or protective cover (at the top of the UV system) by squeezing the tabs, but make sure the VU lamp plug wires remain connected.You may want to allow the system to cool down for 10 minutes. Check to make sure the UV system is not too warm. There may be an alarm that goes off as a warning. Press the pressure button to release the pressure from the cartridges.Turn off the water supply and close all faucets.Step-by-Step Instructions for VIQUA UV Lamp Change: If you have your new replacement lamp, o-rings, and latex gloves (optional), then let's get started: There are many different UV water filter system manufacturers, and the instructions provided below are meant to be only a general guideline. A UV water purification system can help you keep your household safe from illness-causing viruses, bacteria, and other harmful microorganisms.īut your UV water filter will only work if you regularly change the UV lamp and clean the sleeve.īefore changing your UV lamp, it's best to refer to your system's owner's manual. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |